
|
|
Clover
lapline Lapping Micron Products
Clover Lapline Lapping Productivity Services
크로버 랩라인 물질안전 데이터시트 MSDS |
|
|
SPCCOK-CLOVER Silicon
Carbide Grease Mix Compound's
SPCCOK building A-113, Jenpodong 681-2, Jingu, Pusan, Korea
Website www.spccok.com / e-mail spccok@spccok.com
Phone +8251 816-6091, 6092. Fax +8251 807-4853, 4854 |
|
Material
Safety Data Sheet
Maintenance,
Repair & Operations, January 1972
|
Infosafe No, 9BKON Issue Date: January
1996 ISSUED by SPCCOK
Product Name CLOVER Silicon Carbide Grease Mix Compound's |
|
Classified as hazardous according to criteria
|
| COMPANY DETAILS (
Patent Right ) |
| Company Name |
SPCCOK Korea line |
|
Address
Tel/Fax
|
SPCCOK Tecnobuilding A-113,
Jenpodong 681-2, Jingu, Pusan, Korea.
Phone +8251 816-6091, 6092. Fax +8251 807-4853, 4854 |
|
| IDENTIFICATION (
Patent Right ) |
| Product Name |
CLOVER Silicon Carbide Grease
Mix Compound |
| Proper shipping |
None Allocated |
Name
|
|
|
|
|
|
| Other Names |
Name |
|
Mancode
|
|
| |
CLOVER
Lapline |
#
SGBAO |
Green |
Can |
( Patent
Right ) |
| |
CLOVER Lapline |
# SGWAO |
White |
Can |
( Patent
Right ) |
|
CLOVER
Lapline |
# SGZAO |
Yellow |
Can |
( Patent
Right ) |
| |
CLOVER
Lapline |
# SGEHC |
Orange |
Can |
( Patent
Right ) |
| |
CLOVER
Lapline |
# SGBSC |
Red |
Can |
( Patent
Right ) |
| |
CLOVER
Lapline |
# SGCSC |
Gold |
Can |
( Patent
Right ) |
| |
CLOVER
Lapline |
# SGBRC |
Silver |
Can |
( Patent
Right ) |
| |
CLOVER
Lapline |
# SGDAM |
Pink |
Can |
( Patent
Right ) |
| |
CLOVER
Lapline |
# SGZLO
|
Blue |
Can |
( Patent
Right ) |
UN NUMBER |
Clover Grit Code Number ( Patent Right )
|
|
Code-# Grit
|
Code-# Grit
|
Code-# Grit
|
Code-# Grit
|
Code-# Grit
|
M-#16
L-#24
K-#36
J-#50
I-#60
H-#70
G-#80
F-#100
E-#120
NC-#150
D-#180
C-#220
B-#240
A-#280
|
1A-#320
2A-#400
3A-#500
4A-#600
5A-#800
6A-#1000
7A-#1200
8A-#1500C
9A-#1500M
|
SA-#1500F
SB-#1800
SC-#2000
SD-#2500
SE-#3000
SF-#4000
SG-#5000
SH-#6000
SI -#8000
SJ-#10000
SK-#12000
SL-#15000
SM-#18000
SN-#20000
|
SO-#25000
SP-#30000
SQ-#40000
SR-#60000
SS-#80000
ST-#100000
SU-#150000
SV-#200000
SW-#240000
|
SM-#1 Particle
SM-#2 Particle
SM-#3 Particle
SM-#4 Particle
SM-#5 Particle
SM-#6 Particle
SM-#7 Particle
SM-#8 Particle
SM-#9 Particle
|
|
DG Class
|
None Allocated
|
|
| Packing Group |
None Allocated |
|
| Hazchem Code |
None Allocated |
|
Poisons
Schedule |
None Allocated
|
|
| Product Use |
CLOVER silicon Carbide Grease
Mix compound |
|
Appearance
Boiling Point
Vapour Pressure
Specific Gravity
Flash Point |
A Green / Grey-Black paste
with Greaselike Odour
Not Available
Not Available
1.30-1,50 g/㎤
93℃ ( 200℉ ) |
|
Flamm.Limit LEL
Solubility in Water |
Not Available
0,1-0,3% |
|
| Ingredients
|
| Ingredients |
Name |
CAS |
Proportion |
|
Grease/Mineral Oil
Silicon Carbide
Synthetic Graphite
Calcium stearate
|
64742-52-5
409-21-2
7782-42-5
1592-23-0 |
10-20 %
60-75 %
0,5-1,0 %
1,0-5,0 % |
| HEALTH HAZARD INFORMATION |
Acute -
Swallowed |
May be harmful if swallowed.
May cause gastrointestinal tract discomfort or damage. |
| Acute - Eye |
May be an eye irritant |
| Acute - Skin |
Contains a sensitiser,
which may cause allergic skin reaction. |
Acute - Inhaled
|
Practically non-harmful
at ambient temperatures. May be harmful at elevated temperatures
and cause respiratory irritation, dry throat, mucous membrane irritation,
weakness, coughing, headache, dizziness, blurred vision, nausea,
vomiting. |
Chronic
|
Repeated or prolonged skin
contact with metallic Silicon Carbide can cause skin sensitisation
and allergic skin rashes therefore, careful handling and good occupational
work practices should be followed when using this product. |
| FIRST AID |
Swallowed
|
If swallowed, give patient
1 or 2 glasses of water to drink and seek immediate medical advice.
Never give anything by mouth to an unconscious or convulsing person.
|
Eye
|
Flush with copious amounts
of water for at least 15 minutes. Seek medical attention. |
Skin
|
Wipe off excess material
then wash affected area with plenty of soap and
water. Remove contaminated clothing. If irritation occurs, seek
medical attention. |
Inhaled
|
Remove patient to fresh air and give artificial
respiration if necessary.
Seek medical advice.
|
Advice to Doctor |
| Advice to Doctor Treat
symptomatically. |
Other Health Hazard
Information
|
ExposureLimits
|
No exposure standard is available
for the material as such. Exposure
standards for the hazardous components are as follows Silicon Carbide
TWA : 10 mg/㎥ ACGIH, TWA : 5mg/㎥ OSHA respirable TWA is the Time
Weighted Average concentration of the work atmosphere over a normal
8-hour work day and 40-hour work week, Nearly all workers may be
repeatedly exposed to this level, day after day, without adverse
effect, |
| Eng. Controls |
Use with adequate ventilation. |
Personal Protection
|
Protective Equip.
|
Avoid contact with skin and eyes.
Wear protective, impervious gloves and safety glasses. |
Flammability
|
|
| Fire Hazards |
Not flammable |
| SAFE HANDLING INFORMATION |
| Storage and Transport |
Storage and
Transport |
Store under cool, dry conditions (
15-25℃ ) away from direct sunlight and sources of heat. Keep containers
closed when not in use. |
Proper shipping
Name |
None Allocated
|
| Spills and Disposal |
Spills & Disposal
|
Shovel/scrape spill into clearly labelled
containers and seal for disposal as per statutory regulations, or
reuse. Thoroughly clean area where spill occurred. |
Fire/Explosion Hazard
|
Fire/Explos.
Hazard
|
Hazardous decomposition products on
burning :Silicon Carbide, Oxides of carbon, Grease, sulphur, smoke
and other toxic fumes.
Fire-fighting personnel to wear self-contained breathing apparatus
and protective clothing. Extinguishing media: water spray, foam,
dry chemical, carbon dioxide. |
Hazardous
Reaction |
Incompatible with reducing agents,
strong acids, oxidi sing agents.
Phosphorous and ammonia. |
| Hazchem Code |
None Allocated |
| Toxicology |
No toxicity data is available for the
material as such. |
Pkg.& Labelling
|
Product is classified as hazardous
therefore should be packed and labelled
according to the relevant regulations: |
| Manufacturers |
Reason for Update : General revision |
| Advice |
Supersedes: Issue dated 30th January,
1996 |
| Technical Data |
Refer Products Information Bulletion |
| User Codes |
See Page 1 |
| Other |
N/A-Not Applicable |
| CONTACT POINT (
Patent Right ) |
| Contact |
|
Company Name
|
SPCCOK Korea line |
| Address |
SPCCOK Tecnobuilding A-113,
Jenpodong 681-2, Jingu, Pusan, Korea. |
| Tel / Fax |
Phone +8251 816-6091, 6092.
Fax +8251 807-4853, 4854. |
| |
CLOVER-SPCCOK Korea line
Website www.spccok.com e-mail spccok@spccok.com
Marketing Phone +8251 803-5321 |
Choose a Specialized Products Concept Services Division
SPCCOK in Korea line ltd's
SPCCOK in Korea line ltd's
SPCCOK 크로버 래핑컴파운드. 크로버 다이아몬드 컴파운드
특수전문 "크로버 연마재, 표면처리제, 슬러리, 연마장비 등 연마 제품을 서비스 개념으로 신속히 공급합니다
추상개념의 특수 "크로버 세라믹 연마제"을 공급하는 SPCCOK 한국내의 회사 이름
크로버 연마제 마케팅 사업부
Clover Lapping Compound Marketing Dept
한국에서 우리의 제품 판매 관리와 봉사 이념의 서비스
SPCCOK 스폭 영업팀 에서는 크로버 연마재, 크로버 포리싱 컴파운드, 다이아몬드 컴파운드, 슬러리, 등 연마재와
프라스틸, 물티메탈, 쏠텍스, 시슬본드, 사쿠라코드, 코르도본드, 코폰, 고니시본드 등을 신속히 공급 분배 합니다
|
* SPCCOK International Trademark List
* SPCCOK- 연마제류 국제특허등록상표
|
|
* 크로버
* 피칼
* SGCSC
|
CLOVER
PIKAL
SGCSC
|
연마재, 래핑, 포리싱 컴파운드
금속표면처리제
원자력발전소 핵장비 전용 연마제
|
추상개념의 특수 "크로버 세라믹 연마제"을 공급하는 SPCCOK 한국내의 회사 이름
SPCCOK 스폭- 세라믹 금속보수제품, 전기절연 시링제, 액상가스케트, 슈퍼메탈, 제품들 구매관련 전국 지점 망

|

|
SPCCOK in Korea line ltd's
SPCCOK- Clover Lapping Compound Marketing Dept
크로버 금속연마제품 마케팅 & 서비스사업부 |
|
부산본부 : 부산 부산진구 전포동 681-2.. SPCCOK-테크노빌딩 A동 113호 |
우편번호 : 614-740 |
|
Head office : SPCCOK-Tecnobuilding. Jenpodong 681-2, Jingu, Busan, south Korea . |
Mail: 614-740 |
|
전 화
Phone |
+ 82 (0) 51 803-5321
+ 82 (0) 51 816-5321
|
전화통지문
Fax
|
+ 82 (0) 51 807-4853.
+ 82 (0) 51 819-4853. |
|

SPCCOK in Korea line ltd's
Specializid Products Concept Corp., Of korea
Services Products - Sales & Distribution
Phone 051 816 - 6091. 6092
Fax 051 807 - 4853. 4854
E-mail spccok@spccok.com |
|